ClubRoadster.net banner

Help me Resolve Extra Injector Issue

656 views 1 reply 2 participants last post by  keepitsimple 
#1 ·
So the PO installed has a greddy rebic system on my NA which im trying to sort out. I cant quite figure out what hes doing with the fuel thats going into them. Maybe im crazy but I thought it was one line coming from the fuel pump to the FPR/Fuel Rail, and a return line. The way its configured now is the hose still goes to the FPR, but theres another hard line coming from the same spot that is T-ed off a few times into the extra injectors, and then goes to the front side of the fuel rail.

Is that a second Fuel Feed, or is this **** bass ackwards?

And for anyone thats just going to say remove the whole thing ect, spare me the lecture. Its all getting removed after the Holidays are over with and I get my MS. I just need to know which lines are supposed to do what.


The first hardline is in front of my middle finger, and the other is on top of my pointer finger. The black line under my Ring and Middle Finger goes up to the front side of the Fuel rail. And the two hoses under my whole hand go up to the fuel injectors.



 
See less See more
4
#2 ·
You should have one line tied into the supply side and tee'd to the two additional injectors. The return side should just come from the fpr and back to the tank. That would simplify things a little.
All of the fuel pressure exist on the supply side. The return is post manipulated pressure.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top