Fuel Guage not working

NA3Turbo · 07-30-2006, 11:33 PM

Tonight I took my cluster out to replace some burnt out bulbs. After replacing all of them and hooking the plugs back up I noticed that my fuel guage didn't work but everything else does. The needle is maybe a quater inch below "E." I even removed the cluster a second time and made sure I had all of the plugs in Correctly. I know I have gas because I had filled up not 5 minutes before I started ripping things down. Anyone have any ideas? I'd like to fix it ASAP.

NA3Turbo · 07-31-2006, 12:57 AM

Problem solved. I had a small rip in the plastic electronic backing of the cluster that a little dab of solder fixed right up.

07-30-2006, 11:33 PM	#1 (permalink)
NA3Turbo CR.net Old Geezer Join Date: Jun 2006 Location: Aiea/Honolulu, Hawaii Posts: 1,194	Fuel Guage not working Tonight I took my cluster out to replace some burnt out bulbs. After replacing all of them and hooking the plugs back up I noticed that my fuel guage didn't work but everything else does. The needle is maybe a quater inch below "E." I even removed the cluster a second time and made sure I had all of the plugs in Correctly. I know I have gas because I had filled up not 5 minutes before I started ripping things down. Anyone have any ideas? I'd like to fix it ASAP.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-31-2006, 12:57 AM	#2 (permalink)
NA3Turbo CR.net Old Geezer Join Date: Jun 2006 Location: Aiea/Honolulu, Hawaii Posts: 1,194	Problem solved. I had a small rip in the plastic electronic backing of the cluster that a little dab of solder fixed right up.