The Slammed Thread.

CE28N · 06-01-2008, 03:01 PM

I think it's time that we have a slammed thread on here. We have a dropped Miata thread, but this thread is for the ones that are SLAMMED. Join in and post up pics of the slammed cars. I know there are enough of you out there! And if you got coilovers, go outside and drop it, show us the pics. I'll start with a few examples...

doward · 06-01-2008, 03:44 PM

fwdtamiya · 06-01-2008, 05:10 PM

I have brought the book for educational purposes, not getting in the fight

1. If you can fit the stock scissor jack under your car GTFO!
2. If you ain't tucking tire, GTFO! (exception: smaller diameter than 195/45-15)
3. If you're gonna post a picture of your car parked on your front lawn, GTFO!
4. If you're gonna post a picture of your car from an ant's eye view, GTFO!
5. If you're gonna post a picture of your car in a dip or driveway to make your car look lower, GTFO!
6. If you're gonna start your post with "My car isn't slammed, but..", GTFO!
7. If you're gonna start your post with "This is low as my suspension goes.." and you know damn well your car doesn't belong in here compared to others, GTFO!
8. If you're gonna mention in your post that your roads are fucked up so you had to raise up your car, yet you still post a picture of it raised up rather than slammed, GTFO!
9. If you're gonna post a picture of your car photoshopped to be slammed just so you can post in this thread, GTFO!
10. If your car is slammed from the front and not even tucking in the rear, GTFO!
11. If you're gonna sit here and whine about why the cars in here are so low and what's the point of them being slammed, STFU and GTFO!
End of rules.

sonique128 · 06-01-2008, 05:19 PM

slammed!

Col · 06-01-2008, 05:20 PM

i dont really have any recent pics

keep them coming!

CE28N · 06-01-2008, 05:44 PM

^^^Definitely slammed.

More...

This is one example that you don't have to tuck to be slammed. Those are 13"

reckless_abandon · 06-01-2008, 06:02 PM

since the swap, the exhaust hangs lower than the rsr ever did.
so you may never see it at this ride height again. at least not the rear.

driftz · 06-01-2008, 08:37 PM

my stances with 13 by 8" smoor roadsters (175 50 -13)

CE28N · 06-01-2008, 11:29 PM

^^^ We must lower it more. Spark shower is mandatory... haha

more.

Flyineunos · 06-02-2008, 01:43 AM

sonique128 · 06-02-2008, 03:38 AM

XCLR8TN · 06-02-2008, 04:44 PM

Quote:

Originally Posted by A Dingleberry Monstrosity @ Sun Jun 01, 2008 6:07 pm

what exhaust is that!?

Doward's correct: custom. 2.5" all the way to the 3" tip (~12" long).

More of Tyler's out of my collection:

**edited for content per CE28N** ;-)

Sadly, I can't contribute in this thread with pics of my own car... YET.

jeepster118 · 06-02-2008, 09:02 PM

and does thid count as slammed >?

allan32 · 06-03-2008, 08:18 AM

Wow, some nice looking NA's.
Representing the NB's..

pandadriftna · 06-03-2008, 06:32 PM

hope this makes it as slammed i cant fit a oem scissor jack under my car...

CE28N · 06-03-2008, 07:54 PM

More throw back pics...

sonique128 · 06-04-2008, 03:43 AM

CE28N · 06-04-2008, 04:08 AM

^^^ +1. Add that to the rule book!

More blast from the past...

And stealing from Gumby. Hopefully you don't mind.

djsqiigles · 06-04-2008, 05:19 AM

epic thread.

CE28N · 06-04-2008, 03:15 PM

fwdtamiya · 06-04-2008, 10:30 PM

Not at my lowest, but I measured my key and it looks like I was ~2.25-2.5inches to the lowest part of the pinch weld

CE28N · 06-04-2008, 11:56 PM

saw this on Honda-tech, and for some reason, I don't mind the style bar on this one.

trackfiend · 06-05-2008, 12:01 AM

On the scale pads it measured 2.5" clearance to the pinch weld so that counts right?[/img].

CE28N · 06-06-2008, 03:25 AM

Quote:

Originally Posted by RusMan @ Thu Jun 05, 2008 1:26 pm

Haa, didn't think my car was low enough for this thread, haha. Thanks for posting pics ce28n

Well deserved... haha. Fine machine like yours definitely belongs in here.

jeepster118 · 06-06-2008, 10:21 AM

Quote:

Originally Posted by CE28N @ Wed Jun 04, 2008 9:56 pm

saw this on Honda-tech, and for some reason, I don't mind the style bar on this one.

damn peter, thats my friend Jesse lmao...so funny to find his pic here cus he isnt on here man.

dude that car puts me to shame..

here is another pic of it....

and here is more slammage for you peeps.

[IMGhttp://i5.photobucket.com/albums/y167/Jeepster118/l_9ede8ac8270264055291ebba6e4d49-1.jpg[/IMG]

and your not really slammed until you end up with one of these

sorry for the million pics just picture happy lol.

CE28N · 06-06-2008, 03:38 PM

^^^Not slammed either! GTFO! haha

CE28N · 06-10-2008, 05:11 AM

Keeping the thread going. Col, where are the new pics?!

RusMan · 06-10-2008, 10:12 PM

Action shots ok?

doward · 06-10-2008, 11:21 PM

i wanna play!

should have more here in a couple days, post stance install.

ultimateforce · 06-10-2008, 11:59 PM

I wish I could be more slammed.

06-01-2008, 03:01 PM	#1 (permalink)
CE28N Member Join Date: Apr 2006 Location: Long Beach Posts: 1,429	The Slammed Thread. I think it's time that we have a slammed thread on here. We have a dropped Miata thread, but this thread is for the ones that are SLAMMED. Join in and post up pics of the slammed cars. I know there are enough of you out there! And if you got coilovers, go outside and drop it, show us the pics. I'll start with a few examples...
	__________________ my flickr Kinod Photography

06-01-2008, 03:44 PM	#2 (permalink)
doward Member Join Date: Dec 2006 Location: New Albany, Ohio Posts: 548	Re: The Slammed Thread.

06-01-2008, 05:10 PM	#3 (permalink)
fwdtamiya Lost Join Date: Jun 2006 Location: Jacksonville, NC Posts: 5,813	Re: The Slammed Thread. I have brought the book for educational purposes, not getting in the fight 1. If you can fit the stock scissor jack under your car GTFO! 2. If you ain't tucking tire, GTFO! (exception: smaller diameter than 195/45-15) 3. If you're gonna post a picture of your car parked on your front lawn, GTFO! 4. If you're gonna post a picture of your car from an ant's eye view, GTFO! 5. If you're gonna post a picture of your car in a dip or driveway to make your car look lower, GTFO! 6. If you're gonna start your post with "My car isn't slammed, but..", GTFO! 7. If you're gonna start your post with "This is low as my suspension goes.." and you know damn well your car doesn't belong in here compared to others, GTFO! 8. If you're gonna mention in your post that your roads are fucked up so you had to raise up your car, yet you still post a picture of it raised up rather than slammed, GTFO! 9. If you're gonna post a picture of your car photoshopped to be slammed just so you can post in this thread, GTFO! 10. If your car is slammed from the front and not even tucking in the rear, GTFO! 11. If you're gonna sit here and whine about why the cars in here are so low and what's the point of them being slammed, STFU and GTFO! End of rules.
	__________________

06-01-2008, 05:19 PM	#4 (permalink)
sonique128 Esteemed Member Join Date: Apr 2006 Location: Southern California Posts: 4,379	slammed!
	__________________ http://linhbergh.com/blog flickr \| twitter \| facebook

06-01-2008, 05:20 PM	#5 (permalink)
Col CR.net Supporter Join Date: Aug 2007 Location: Scotland Posts: 764	i dont really have any recent pics keep them coming!
	__________________ www.jdmy0.net Flickr

06-01-2008, 05:44 PM	#6 (permalink)
CE28N Member Join Date: Apr 2006 Location: Long Beach Posts: 1,429	^^^Definitely slammed. More... This is one example that you don't have to tuck to be slammed. Those are 13"
	__________________ my flickr Kinod Photography

06-01-2008, 06:02 PM	#7 (permalink)
reckless_abandon Sponsor Join Date: Dec 2006 Location: BC Posts: 1,391	Re: The Slammed Thread. since the swap, the exhaust hangs lower than the rsr ever did. so you may never see it at this ride height again. at least not the rear.
	__________________ visit Rev9 Autosport for all your jdm roadster needs! the rotary roadster build speedhunters coverage

06-01-2008, 11:29 PM	#9 (permalink)
CE28N Member Join Date: Apr 2006 Location: Long Beach Posts: 1,429	^^^ We must lower it more. Spark shower is mandatory... haha more.
	__________________ my flickr Kinod Photography

06-02-2008, 01:43 AM	#10 (permalink)
Flyineunos Speed Tribe OG Member Join Date: Jun 2006 Posts: 3,989	Re: The Slammed Thread.
	__________________ yeah

06-02-2008, 03:38 AM	#11 (permalink)
sonique128 Esteemed Member Join Date: Apr 2006 Location: Southern California Posts: 4,379
	__________________ http://linhbergh.com/blog flickr \| twitter \| facebook

06-02-2008, 09:02 PM	#13 (permalink)
jeepster118 Member Join Date: Aug 2006 Posts: 226	and does thid count as slammed >?
jeepster118 Member Join Date: Aug 2006 Posts: 226	__________________ someone is back and better than ever!!! http://img.photobucket.com/albums/v2...eepster118.jpg ^I miss it^

06-03-2008, 08:18 AM	#14 (permalink)
allan32 Supporting Member Join Date: Mar 2008 Location: Welland ON Posts: 661	Re: The Slammed Thread. Wow, some nice looking NA's. Representing the NB's..

06-03-2008, 06:32 PM	#15 (permalink)
pandadriftna Member Join Date: Dec 2006 Location: Willow Glen aka nice part of san jose, CA Posts: 311	Re: The Slammed Thread. hope this makes it as slammed i cant fit a oem scissor jack under my car...
	__________________ please help my dog Trixie get to rehab http://img.photobucket.com/albums/v2...drunkbitch.jpg the car http://img.photobucket.com/albums/v2...r/DSCN0738.jpg http://img.photobucket.com/albums/v2...r/DSCN0747.jpg and no i do not do write up's

06-03-2008, 07:54 PM	#16 (permalink)
CE28N Member Join Date: Apr 2006 Location: Long Beach Posts: 1,429	More throw back pics...
	__________________ my flickr Kinod Photography

06-04-2008, 03:43 AM	#17 (permalink)
sonique128 Esteemed Member Join Date: Apr 2006 Location: Southern California Posts: 4,379
	__________________ http://linhbergh.com/blog flickr \| twitter \| facebook

06-04-2008, 04:08 AM	#18 (permalink)
CE28N Member Join Date: Apr 2006 Location: Long Beach Posts: 1,429	^^^ +1. Add that to the rule book! More blast from the past... And stealing from Gumby. Hopefully you don't mind.
	__________________ my flickr Kinod Photography

06-04-2008, 05:19 AM	#19 (permalink)
djsqiigles Senior Member Join Date: Apr 2006 Location: fountain Valley, CA Posts: 2,619	epic thread.

06-04-2008, 03:15 PM	#20 (permalink)
CE28N Member Join Date: Apr 2006 Location: Long Beach Posts: 1,429
	__________________ my flickr Kinod Photography

06-04-2008, 10:30 PM	#21 (permalink)
fwdtamiya Lost Join Date: Jun 2006 Location: Jacksonville, NC Posts: 5,813	Re: The Slammed Thread. Not at my lowest, but I measured my key and it looks like I was ~2.25-2.5inches to the lowest part of the pinch weld
	__________________

06-04-2008, 11:56 PM	#22 (permalink)
CE28N Member Join Date: Apr 2006 Location: Long Beach Posts: 1,429	saw this on Honda-tech, and for some reason, I don't mind the style bar on this one.
	__________________ my flickr Kinod Photography

06-05-2008, 12:01 AM	#23 (permalink)
trackfiend Jr. Member Join Date: Jul 2006 Posts: 69	Re: The Slammed Thread. On the scale pads it measured 2.5" clearance to the pinch weld so that counts right?[/img].
trackfiend Jr. Member Join Date: Jul 2006 Posts: 69

06-06-2008, 03:38 PM	#26 (permalink)
CE28N Member Join Date: Apr 2006 Location: Long Beach Posts: 1,429	^^^Not slammed either! GTFO! haha
	__________________ my flickr Kinod Photography

06-10-2008, 05:11 AM	#27 (permalink)
CE28N Member Join Date: Apr 2006 Location: Long Beach Posts: 1,429	Keeping the thread going. Col, where are the new pics?!
	__________________ my flickr Kinod Photography

06-10-2008, 10:12 PM	#28 (permalink)
RusMan Member Join Date: Apr 2006 Location: WA Posts: 526	Action shots ok?

06-10-2008, 11:21 PM	#29 (permalink)
doward Member Join Date: Dec 2006 Location: New Albany, Ohio Posts: 548	i wanna play! should have more here in a couple days, post stance install.
	__________________ 94 M, 1.9l 99 head, Honda IM, AEM EMS, 142whp, NB subs/arms/spindles/Sport brakes, 9"/225, 700/400. My build thread

06-10-2008, 11:59 PM	#30 (permalink)
ultimateforce BACK BY POPULAR DEMAND Join Date: Jun 2006 Location: Orlando, Florida Posts: 5,098	I wish I could be more slammed.
	__________________ Dumb Cars I Own:1986.5 Nissan Hardbody (longbed), 1994 Nissan 240sx (Convertible), 1994 Mustang GT Shout-Outs: Hank Chinaski, sonique128, Skinnyroadster, Oops2Low, mk_slayr, Haigog, Kuane. Certified TIG Welder: 304 Stainless / 5052 Aluminum - 3F / 3G - 1/16th - 1/4th inch thick. Keep the Jeep Riding. http://www.youtube.com/watch?v=MCMFt...eature=g-all-u

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode