turbo 2 rear install?

silverslider · 09-30-2009, 06:28 PM

Is it true that the rx7 turbo 2 rear are all limited slip and will fit without modification? (In a 96 NA). And is the rear stock strong enough for light to moderate amounts of drifting.

Sorry for not using search but blackberrys are so freakin slow

Phatmiata · 09-30-2009, 10:20 PM

not sure but i think V8 Roadsters was making a kit for that swap?

dark_dementshun · 10-01-2009, 10:01 AM

The TII diff is what i am running in my LS1 miata right now. The rear portion bolts into stock location and you have to make a mount for the front. Not too hard at all. A lot of the older ones seem to slip some with age, but can be rebuilt tighter than from the factory. Also, if you are making too much power for it stock, you can always plop in a KAAZ 1.5 way and call it a day. The main downside is the lack of gear options.

09-30-2009, 06:28 PM	#1 (permalink)
silverslider CR.net Supporter Join Date: May 2007 Location: abingdon MD Posts: 575	turbo 2 rear install? Is it true that the rx7 turbo 2 rear are all limited slip and will fit without modification? (In a 96 NA). And is the rear stock strong enough for light to moderate amounts of drifting. Sorry for not using search but blackberrys are so freakin slow

09-30-2009, 10:20 PM	#2 (permalink)
Phatmiata Rare Parts Hoarder Join Date: Mar 2006 Location: Tampa, FL Posts: 8,938	Re: turbo 2 rear install? not sure but i think V8 Roadsters was making a kit for that swap?
	__________________ No Roadster, No Life!

10-01-2009, 10:01 AM	#3 (permalink)
dark_dementshun Member Join Date: Nov 2008 Location: Hattiesburg, MS Posts: 137	Re: turbo 2 rear install? The TII diff is what i am running in my LS1 miata right now. The rear portion bolts into stock location and you have to make a mount for the front. Not too hard at all. A lot of the older ones seem to slip some with age, but can be rebuilt tighter than from the factory. Also, if you are making too much power for it stock, you can always plop in a KAAZ 1.5 way and call it a day. The main downside is the lack of gear options.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode