hnguyen037

The Pro-Car Innovations race spec seat mounts are a direct bolt in to the factory mount location for a hassle free, easy installation for your competition race seat. The PCI seat mounts have a large range of adjustment options allowing fitment for all major FIA and SFI approved seat brands. The wide ranges of adjustment covers almost all possible seating preferences to properly seat drivers of all sizes. CAD designed, CNC laser cut and formed from one piece of .125” (1/8”) steel with no welds to maximize strength and stiffness. All mounts are powder coated with a wrinkle black base and silver sides. PCI seat mounts meet FIA specifications.
· CAD designed
· Direct bolt in to factory seat mount location with little modification
· One piece design, no welds for maximum strength and stiffness
· CNC laser cut and formed from .125” (1/8”) steel
· Wrinkled black powder coated base mount silver powder coated side mounts
· Stainless steel bolt on logo plates
· 5 and 6 point sub belt mounting holes
· Fits most major FIA/SFI approved seats
We offer two versions.
Version 1:
· Works with seats with tapered sides and parallel sides
· Updated with new low profile hardware
· Perfect for short guys
· Fits seats up to 17" wide
· Requires little modification of the transmission tunnel
· Custom bottom locking hardware
· 6” adjustment range which covers almost all possible seating preferences
Price is $200 shipped anywhere to the continental US!



Version 2:
· Works with seats with parallel sides only
· Will allow you to sit very low!
· Fits seats up to 16.5" wide
· Major modification of transmission tunnel needed
· Up to 3" of adjustment
Price is $150 shipped and paypaled anywhere in the continental US!


If your seat does not fit the standard version 2, we can custom design it to fit your seat. Here is one we did for the Recaro Pole Position

NOTE for late model NA's and NB's: A seat belt buckle bracket is needed which will be available soon.
How to place an order:
PM or email kazespecengineering@gmail.com with the following information:
Model (NA or NB)
Seat you plan on using
seat buckle bracket (yes or no)
Version you are interested in
Location
Email address
Thanks!

-------------------Post 2---------------------------------
Modification required for Version 1:
Here is where you need to hammer

Area markered where you need to hit

Seat mount fitted

Clearance with Sparco Pro2000

Seat fitted in car


Modification required for version 2:
You need to hammer along this area

Done

Sparco Sprint V mounted in last and bottom holes

Centered with steering wheel

Lots of clearance with back wall

Clearance with side panels and door

Clearance with top of hoop

Clearance with top

Attached Images

	PCI seat mount miata2.jpg (34.5 KB, 518 views)
	PCI seat mount miata.jpg (44.0 KB, 248 views)
	PCI seat mount miata3.jpg (42.5 KB, 225 views)
	PCI seat mount miata4.jpg (43.7 KB, 226 views)

__________________

hnguyen037

Here is the only modification required.
miata problem area.jpg

area needing modification.jpg

Picture of an unfinished seat mount in the car
PCI wide seat mount miata in car.jpg

Seat mounted
PCI wide seat mount miata seat bolted.jpg

__________________

Flyineunos

did i miss the price?

__________________
yeah

Rezist09

Might take this

__________________
Garagestar

Tadpole

Definitely interested in these.

batou

Those bottom bolts are going to raise the seat up at least half an inch =|

Price?

hnguyen037

These actually sit 1.5-2" lower than stock. whoops, updated post with the price

__________________

hnguyen037

great news! passenger side seat mounts are now in!

__________________

djp0623

I just ordered a set. So, would you mind describing the modifications. Looks like a new hole. Do you also have to beat the circled area with a big hammer?

ChrisJuliano

Wow those look so high quality and well made. I am going to have to remember this for when I get some side mounted seats

__________________
Am I clubroadster yet?
Instagram @JulianoPhoto
MY BUILD THREAD
www.flickr.com/photos/chrisjuliano
www.youtube.com/chrisjuliano

hnguyen037

There is no new hole. You just lightly hammer out the circled area. This only needs to be done on the passenger side (due to exhaust routing)

__________________

hnguyen037

these seat mounts save you a bunch of weight over stock and the Recaro mounts. 7 lbs TOTAL!

__________________

LunchboX

Awesome all in one solution. Will definitely be getting these if/when i get a better seat.

hnguyen037

Just letting you guys know I will be out of town til Monday, so all orders that have been placed will ship out then.

__________________

hnguyen037

bump! 1 set left in stock until i have to start another batch!

__________________

xcoldricex

eta on bottom mount seat brackets?

Bluegs03

Sent ya a pm about purchasing

hnguyen037

sending out shipments!

__________________

hnguyen037

Update guys! We have come out with a version 2, for all of you tall guys! This seat mount fits seats up to 16.5" wide, and allows you to put the seat as low as it can go. We got rid of the slotted holes and made this one piece, for ultimate strength. There are a number of holes in the side mount for you to adjust your seating preference to fit you best. This will fit seats with parallel sides only (i.e. Sparco Sprint V, Bride Zeta III, etc). It requires major modification of the transmission tunnel.

Price is $150 shipped and paypaled anywhere in the continental US!

__________________

imnatelol

Damn it so much for Saving my money, how much picked up?

hnguyen037

I'll let you know when the batch arrives!

__________________

imnatelol

Thanks man I need a rail already

stormin'norman

Wow those look slick. Good work!

__________________

"I think I'll go buy one of those large foam hands you see at sporting events and zip tie it to my left mirror in a permanent point-by position." -Rich Cohn Lee

Bluegs03

Hey i just got my seat mount and i have to say they are awesome! The quality of the work and details are second to none. I had doubts about the price being so high but seeing the finished product all powdercoated and precision cut put any doubts to rest. Anyone who is considering seat mounts needs to get these no if and or buts about it. Thanks for the great product!

hnguyen037

Glad you like it! If you have any problems or questions, don't be afraid to let me know! We are always looking to improve

__________________

nope-mx5

You might find another market if you create some mounts that would fit Lotus Elise seats as well.
Pretty popular choice among miata owners

-n

xcoldricex

eta on bottom mount brackets??

hnguyen037

good to know! now to find someone local who has one

we tried making a bottom mount seat for the sprint V and found that it wasn't possible with our design. Sorry

__________________

B-mar

Would these seats work well with the Corbeau FX1 Pro?

AnnorexicRoadster

Would like to know the weight of these new mounts and if they will fit on Recaro Pole Position in a NB