NA3TURBO's NA-T Build Thread Re-lived! 56K BEWARE

NA3Turbo · 01-31-2007, 07:40 PM

Since I let my build thread die due to waiting on parts and no updates I'll be creating this one to recap whats been going on, which is not to much but i have gotten some parts in within the last few days/weeks.

Here's my first Thread for those who have yet to see it.
http://www.clubroadster.net/forum/vi...527&highlight=

To recap the build here's whats going on: roughly

Block: 1.6L
Wiseco Pistons 8.5:1, .040 over
Carrillo Rods H-beam
OEM bearings
Billet Steel Maincaps
ARP Main Studs
Bill Wilner's Oil Pump Gears
Balanced/blueprinted
Micropolished Crank
Polished Oil Galleries
Linehoned
Decked

Head:
Extrudehone Intake Manifold
Supertech Valves(1mm over)/Springs/Retainers
Solid Lifters (of which i havent decided on yet)
HKS 264 Cams
FlyinMiata Gears
ARP Head Studs
Cometic Headgasket
Port/Polished
Multi-Angle Valve job

Trans/Diff
1.8 or rx-7 Diff
Kazz or Mazda Torsen
6 speed tranny

Fuel/timming:
Custom Dual-feed rail (Willis Machine Concord, NC)
1000cc Injectors
Balast Resistors
Miata Link EMS

Boost:
GT35R .63ar
Begi Manifold
Precision Intercooler
HKS Wastegate
HKS SSQV BOV
LOTS OF BOOST! :-D

Body:
MS Works Fenderflares(still waiting on order from Jap-land)
Garage Vary Front Lip
Military Green Polyester Paint

Wheels/Tires:
Work Equip 01's
undecided on tires.

Interior:
ISP Race Seat
Simpson Harness
Cage(custom?, waiting until paint is done)
Momo Steering wheel

Electronics:
Apexi AVCR
AEM Wideband

Here's some pics of the new goodies I just got. The block goes off to the machine shop somtime within the next week or so, or when I gather the money for work.

Wiseco Pistons/Carrillo Rods

Bill Wilners' Oil Pump Gears (in my old oil pump, not the new one)

ISP Race Seat (BSR Concord, NC) Custom made for ME! :-D

Got bored the other night and made a new Shift boot. Crown Royal! :-P

My Garage, Where everything goes down!... I know I need to clean up some.

slutz4 · 01-31-2007, 08:32 PM

looks like you got your work cut out for ya, btw your garage looks pretty clean to me

NA3Turbo · 01-31-2007, 08:42 PM

Quote:

Originally Posted by slutz4 @ Wed Jan 31, 2007 10:32 pm

looks like you got your work cut out for ya, btw your garage looks pretty clean to me

I do have my work cut out for me, but things are starting to turn around now. Parts I ordered months ago are finally comming in from overseas. It's alot of time and money, both of which I dont have much of at the moment, so I do as much as I can when I can.

leatherface24 · 02-01-2007, 09:04 AM

Very cool man! Ill be watching this thread like a hawk. This is too cool since you'll be documenting the new turbo monster build and im documenting my new NA monster build!

Quinn · 02-01-2007, 09:21 AM

Curious, why did you choose 8.5:1 compression?

JDMAflac · 02-01-2007, 10:05 AM

Good to hear Brad, I see your dad built you the work bench. Good stuff. Let me know if i can help with anything

Stealth97 · 02-01-2007, 10:30 AM

<<< this guy really likes your shift boot.

LostSoulMiata · 02-01-2007, 02:11 PM

Quote:

Originally Posted by Stealth97 @ Thu Feb 01, 2007 12:30 pm

<<< this guy really likes your shift boot.

+1

<---This guy too

peteberta · 02-01-2007, 02:21 PM

If you don't mind. Who extrudehoned your intake and how much did it run?

TIA,

NA3Turbo · 02-01-2007, 09:29 PM

Quote:

Originally Posted by peteberta @ Thu Feb 01, 2007 4:21 pm

If you don't mind. Who extrudehoned your intake and how much did it run?

TIA,

not done yet. my intake manifold is at the shop where my fuel rail is being made. i havent picked them up yet. i was going to send it to Bill to get done, that is if i cant find a place more local to do it for me.

NA3Turbo · 02-13-2007, 11:33 AM

As of today (2/13/07) the block has been taken to the machine shop for work/assembly. it should be done within the month. In the mean time, ill be purchasing stuff for the head build, as well as picking up my seat.

black92fd · 02-14-2007, 03:12 PM

nice, good luck!...i see ol' pops came by and built the bench...looks good.

that thing is huge!!!

gimmie a call today sumtime, around 12pm my time ill be gone for like an hour or 2 maybe...

slutz4 · 03-29-2007, 07:25 PM

any update on this project?

NA3Turbo · 03-29-2007, 08:09 PM

working on it. waiting for the block to come back from the machine shop. couple parts came in, been very busy working to fund this thing.

arcana · 03-29-2007, 11:34 PM

< This guy also really likes your shift boot.

I had to take training classes in Charlotte a couple times for my last job, I wish I had known you were there...I would've looked you up. Oh well, next time - I'd like to see your project.

klutchmaster · 05-07-2007, 10:17 PM

This project is so awsome. I can't wait till it is finished. I want to see how everything turns out.

01-31-2007, 07:40 PM	#1 (permalink)
NA3Turbo CR.net Old Geezer Join Date: Jun 2006 Location: Aiea/Honolulu, Hawaii Posts: 1,194	NA3TURBO's NA-T Build Thread Re-lived! 56K BEWARE Since I let my build thread die due to waiting on parts and no updates I'll be creating this one to recap whats been going on, which is not to much but i have gotten some parts in within the last few days/weeks. Here's my first Thread for those who have yet to see it. http://www.clubroadster.net/forum/vi...527&highlight= To recap the build here's whats going on: roughly Block: 1.6L Wiseco Pistons 8.5:1, .040 over Carrillo Rods H-beam OEM bearings Billet Steel Maincaps ARP Main Studs Bill Wilner's Oil Pump Gears Balanced/blueprinted Micropolished Crank Polished Oil Galleries Linehoned Decked Head: Extrudehone Intake Manifold Supertech Valves(1mm over)/Springs/Retainers Solid Lifters (of which i havent decided on yet) HKS 264 Cams FlyinMiata Gears ARP Head Studs Cometic Headgasket Port/Polished Multi-Angle Valve job Trans/Diff 1.8 or rx-7 Diff Kazz or Mazda Torsen 6 speed tranny Fuel/timming: Custom Dual-feed rail (Willis Machine Concord, NC) 1000cc Injectors Balast Resistors Miata Link EMS Boost: GT35R .63ar Begi Manifold Precision Intercooler HKS Wastegate HKS SSQV BOV LOTS OF BOOST! :-D Body: MS Works Fenderflares(still waiting on order from Jap-land) Garage Vary Front Lip Military Green Polyester Paint Wheels/Tires: Work Equip 01's undecided on tires. Interior: ISP Race Seat Simpson Harness Cage(custom?, waiting until paint is done) Momo Steering wheel Electronics: Apexi AVCR AEM Wideband Here's some pics of the new goodies I just got. The block goes off to the machine shop somtime within the next week or so, or when I gather the money for work. Wiseco Pistons/Carrillo Rods Bill Wilners' Oil Pump Gears (in my old oil pump, not the new one) ISP Race Seat (BSR Concord, NC) Custom made for ME! :-D Got bored the other night and made a new Shift boot. Crown Royal! :-P My Garage, Where everything goes down!... I know I need to clean up some.

01-31-2007, 08:32 PM	#2 (permalink)
slutz4 Esteemed Member Join Date: Oct 2006 Location: Lawrenceburg Indiana Posts: 3,772	Re: NA3TURBO's NA-T Build Thread Re-lived! 56K BEWARE looks like you got your work cut out for ya, btw your garage looks pretty clean to me

02-01-2007, 09:21 AM	#5 (permalink)
Quinn I don't have bad days Join Date: Apr 2006 Location: Connecticut Posts: 2,572	Curious, why did you choose 8.5:1 compression?
	__________________ 1999 NB8C, TWM ITB's, Adaptronics, Maruha Header + Cams, Advan RG II's, 4.77's, 172whp 1994 NA8C, SCCA Spec Miata Race Car, 106whp 1991 NA6C, Turbo, Flares, Tein Flex, MSPNP, Work Equip 01's, Retro Goodness, 254whp 1993 FD3S, SP 13b, T04S 60-1, Haltech, V-Mount, 99 Spec Aero, RPF-1's, 417whp 1993 FD3S, SP 13b, T04S 60-1, V-Mount, RE-Amemiya Widebody in progress 2003 AP1, AP2V1 Wheels, Kuhmo XS, Daily Grind and 1993 Suburban K1500, The Lump

02-01-2007, 10:05 AM	#6 (permalink)
JDMAflac CR.net Supporter Join Date: May 2006 Location: charlotte, NC Posts: 2,922	Good to hear Brad, I see your dad built you the work bench. Good stuff. Let me know if i can help with anything
	__________________ 90' Mazda Miata- Boosted!

02-01-2007, 10:30 AM	#7 (permalink)
Stealth97 bad mother f...... Join Date: Apr 2006 Location: Takin a Cr.net break. '08 members.. Posts: 3,173	<<< this guy really likes your shift boot.
	__________________ I'm flipping burgers overtime so I can get the sportmaxxxx of my dreams.

02-01-2007, 02:21 PM	#9 (permalink)
peteberta Member Join Date: Sep 2006 Location: Chicago, IL Posts: 490	If you don't mind. Who extrudehoned your intake and how much did it run? TIA,
	__________________ "The difference between genius and stupidity is that genius has its limits." Albert Einstein

02-13-2007, 11:33 AM	#11 (permalink)
NA3Turbo CR.net Old Geezer Join Date: Jun 2006 Location: Aiea/Honolulu, Hawaii Posts: 1,194	As of today (2/13/07) the block has been taken to the machine shop for work/assembly. it should be done within the month. In the mean time, ill be purchasing stuff for the head build, as well as picking up my seat.

02-14-2007, 03:12 PM	#12 (permalink)
black92fd Member Join Date: Jan 2007 Location: hawaii Posts: 271	nice, good luck!...i see ol' pops came by and built the bench...looks good. that thing is huge!!! gimmie a call today sumtime, around 12pm my time ill be gone for like an hour or 2 maybe...
	__________________ http://i69.photobucket.com/albums/i7...IMG_0044_1.jpg

03-29-2007, 07:25 PM	#13 (permalink)
slutz4 Esteemed Member Join Date: Oct 2006 Location: Lawrenceburg Indiana Posts: 3,772	any update on this project?

03-29-2007, 08:09 PM	#14 (permalink)
NA3Turbo CR.net Old Geezer Join Date: Jun 2006 Location: Aiea/Honolulu, Hawaii Posts: 1,194	working on it. waiting for the block to come back from the machine shop. couple parts came in, been very busy working to fund this thing.

03-29-2007, 11:34 PM	#15 (permalink)
arcana CR.net Supporter Join Date: Feb 2007 Location: RIC Posts: 1,138	Re: NA3TURBO's NA-T Build Thread Re-lived! 56K BEWARE < This guy also really likes your shift boot. I had to take training classes in Charlotte a couple times for my last job, I wish I had known you were there...I would've looked you up. Oh well, next time - I'd like to see your project.
	__________________ 1997 NA8 1982 RX-7 2000 Ducati M900ie

05-07-2007, 10:17 PM	#16 (permalink)
klutchmaster Member Join Date: Oct 2006 Location: Guilford Indiana Posts: 123	This project is so awsome. I can't wait till it is finished. I want to see how everything turns out.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode